PA2400T

-  Efficient performance for low impedance or distributed systems 

-  Ideal for sound reinforcement, paging, and life safety 

-  400 W per channel for 4 Ω or 70/100 V lines

-  Bridged mono out for 860 W into 8 Ω

-  Compact 2 RU design

-  Stepped rear-panel level attenuation

-  Selectable 50 Hz or 300 Hz high-pass filter

-  Thermal protection, peak limiting, turn-on delay

-  Phoenix-type inputs and outputs

-  Three-stage front-to-rear fans

-  Integrated rack ears for direct mounting

-  Amplifier Gain : 34 dB

-  Continuous Rated Power (1 kHz, THD 1%) 100v : 430 Watts

-  Continuous Rated Power (1 kHz, THD 1%) 4Ω : 430 Watts

-  Continuous Rated Power (1 kHz, THD 1%) 70v : 430 Watts

-  Continuous Rated Power (1 kHz, THD 1%) 8Ω : 215 Watts

-  Continuous Rated Power (20-20 kHz,THD<0,2%) 100v : 400 Watts

-  Continuous Rated Power (20-20 kHz,THD<0,2%) 4Ω : 400 Watts

-  Continuous Rated Power (20-20 kHz,THD<0,2%) 70v : 400 Watts

-  Continuous Rated Power (20-20 kHz,THD<0,2%) 8Ω : 200 Watts

-  Crosstalk : < < -75 dB

-  DIM 30 : < 0.1 %

-  Frequency Response : 65Hz - 40kHz -1dB, ref. 1kHz

-  Impedance : 4/8 Ω 70V/100V

-  Input Impedance (Balanced) : > 20 kΩ

-  Input Sensitivity :

0 dBu (775mV) @ rated output power or voltage, 1kHz

-  Intermodulation Distortion (SMPTE) : < 0.1 %

-  Network Control (IRIS-Net) : No

-  Number of Channels : 2

-  Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz :

400/200 W 70V/100V-400

-  Rated output power (*rated load) THD < 1%, 1kHz :

430/215 W 70V/100V-430

-  Signal-to-Noise Ratio (A-weighted) : 103 dB

-  Slew Rate : 25 V/µs 70V-46, 100V-65

-  Total Harmonic Distortion : < 0.1 %

-  Height : 2RU 88 mm 

-  Width : 483 mm 

-  Depth : 406 mm 

-  Weight Net : 26 kg